Replace Nissan Key Fob Batteries
If your Nissan key fob isn't responding your instructions, it's most likely that its battery is depleted. It's a relatively easy repair that most people can fix themselves.
You can purchase an upgrade from a hardware store, or in your owner's manual for the particular model you own, and you'll need to follow these steps to change the battery.
Changing the Battery
The key fob on your Nissan model is equipped with a built-in battery that could eventually lose its charge. The battery for the key fob can be replaced within a matter of minutes. You'll first need to purchase the CR2032 batteries. It's a tiny coin cell battery that's typically used in key fobs and it can be found in most convenience stores. To open the key fob, you will also require a pair (latex or not) of gloves, as well as an incredibly small screwdriver. Read nissan micra key price for a detailed guideline and steps before starting.
Flip the fob upside down and look over the backside. You will see a small latch that you have to let go by pulling it down. This will release the mechanical key from its original position inside the fob.
Place the battery in place and ensure that it is properly positioned. Close the fob once the battery has been placed and click the two sides of the fob together. Check the fob's functionality after completing this step by pressing the unlocking button. You'll now be able to utilize the numerous features of your Nissan if everything is working well. It's recommended to re-program the key fob following the change of the battery to make sure it's operating properly.
Replace the Transmitter
With your key fob serving as the "key" to a myriad of your car's most crucial functions, it can be a serious blow when you lose or damage it. If you lose or damaged key fob, you'll find yourself without the ability to lock or start your car.
Therefore, it's a smart idea to keep an extra key fob in case of emergency. Fortunately, the process of replacing your Nissan key fob is relatively easy. The process of replacing the Nissan key fob can be quite simple. You'll require an entirely new flathead screwdriver and the new battery to get rid of the old.
You'll require a round Panasonic CR 2032 3V battery (you will typically find them in multipacks at less than $5 USD). The battery will be inside the key fob's back half, and you'll need to gently push the two halves to expose it. Make use of a flathead screwdriver or a small flathead to take off the clip that is on the top of the battery. Make sure to note the position. Replace the battery and then assemble the key fob. Check it out to confirm it is working.
As with all electronic devices, your Nissan Intelligent Key will eventually wear out due to regular use and need to be replaced. To avoid this issue, it's a good idea to shield your key fob from magnetic fields, water and physical impacts So, be careful not to drop it or place too much pressure on it.
Replacing the Key
When your Nissan key fob is no longer working you won't be able to use it to unlock or start your car. This is a problem for those who have to travel to work in Detroit or go on errands around Dearborn.
The good news is, the battery inside your Nissan smart key isn't a problem to replace. You can do it at home or at the dealership, and usually, you can get a battery for less than $5 at an hardware store.
Flip the fob upside down and push the small catch to the back. This will release the mechanical emergency key. While you won't have the ability to use the emergency key to start your car it will let you open the door.
Next take a look for a small opening on the top of the key fob casing. These are ideal to place screws into, allowing you to pry the two pieces of the key fob. Once you've accessed the internal battery, take it out it and take note of its location. When you're ready to reassemble the key fob, place the new battery into its spot and snap the two sections of the case together. Insert the mechanical key and your Nissan smartkey will function just as normal.
Other Problems
Many modern cars are equipped with key fobs that allow you to lock and open them without requiring the physical car key. The key fob uses an electronic transmitter to connect with the computer system of the car.
There are several possible reasons why your Nissan key fob won't function after replacing the battery. One possibility is that the new battery was not correctly fitted into the key fob. Another possibility is that the key fob has to be reset. This is a straightforward process which you can carry out at home using a few tools.
You'll require, for instance an electric screwdriver with an angled tip to remove the old battery from the key fob. With a screwdriver, pull the back of the keyfob open and then insert the new batteries. You'll also need to reset your key fob to allow it to function with your vehicle.
Fortunately, most Nissan key fobs can be programmed by a user which means that you can accomplish this yourself. This is usually done by inserting the keyfob into the ignition twice in five minutes. If this does not work, you can usually take your key fob to an auto locksmith or dealer to get it programmed. The cost of this service will differ based on the person you talk to and the kind of car you own.